Privacy Policy

Cookie Preferences

We use cookies and other tracking technologies to improve your browsing experience on our website, show you personalised content, and analyse our website traffic. Privacy Policy

Privacy Policy

4G WorldSIM with Alphatronics

This SIM card allows you to connect a UNii panel, using a UNii 4G mobile expansion module, to UNii Online, mySmartControl or a ARC via a mobile network.

Don't have a CSL IoT platform account yet? Please create an account before you can proceed to activate your SIM. Follow the instructions below.

EXISTING ACCOUNT

NO ACCOUNT YET

Click on the link below to log in to the CSL IoT Platform

Click on the link below to request an account and log in to the CSL IoT Platform. The processing time takes a few hours.

Click here to access the IoT Platform

Click here to create an account

GETTING STARTED

  1. Simply link the SIM via the platform.
  2. Click the '+' icon to link the SIM to your account.
  3. Enter the ICCID number, which is listed on the back of the SIM.
  4. Confirm the ICCID number.
  5. Select the Alphatronics bundle for the SIM.

A final pop-up window will appear confirming that the SIM has been successfully added to the account. To check the SIM, go to the "IoT/SIMs" section of the menu.

  1. Look up your SIM in the overview and "Pre-activate" the SIM before you go to the customer location so that it is ready for use. Once the SIM actually starts sending data, it will start invoicing. If you wish to activate the SIM immediately, click the "Activate" button.

INSTALL UNII 4G MOBILE EXPANSION

Make sure the UNii panel is connected to your laptop via Ethernet.

  1. The UNii panel should be disconnected from power.
  2. Insert the SIM card into the UNii 4G mobile expansion module.
  3. Apply power to the UNii panel.
  4. Using the UNii Manager software, connect to the UNii panel and retrieve the configuration.
  5. In the "Settings/Mobile Network" menu, set Roaming to "Allowed".
  6. In the "Settings/Mobile Network" menu, enter the SIM APN information. APN: internet.csliot.com / Private APN: m2m.csles.com (user and password should be left blank).
  7. In the "Settings/Mobile Network" menu, set the mobile network to "Active".
  8. Save the settings made in steps 5, 6 and 7 above.
  9. The SIM registers in the network. You can check this in menu "Diagnosis/Overview" under "Mobile Network".
  10. After registration, the UNii 4G mobile expansion module is ready to use.

TROUBLESHOOTING

UNii 4G mobile expansion module - It is important that the installation instructions have been carried out correctly.

SIM card - Check that the SIM card is inserted correctly into the UNii 4G mobile expansion module.

SIM does not register online - Make sure you have followed steps 5 and 6 (as above).

Mobile network - Use the CSL Signal Analyser to determine if there is a suitable mobile signal in the area. If the device still does not register with a network, contact CSL Support.

SUPPORT

For further assistance on:

  • Alphatronics UNii 4G mobile expansion module - call Alphatronics Technical Support on +31 33 2459 786
  • CSL 4G Alphatronics WorldSIM - call CSL Technical Support on +31 88 4747 777 (have SIM details ready)