Panel Connection – Dial Capture
| Manufacturer | Carrier - Interlogix |
| Model | Tecom |
| Version | Challenger 8 |
| Minimum Panel Firmware | N/A |
| Cable required? |
MCM connected to
|
| Panel Profile | INTERLOGIX-CHALLENGER-MCM |
| Panel Bus Connection | Dial Capture |
Panel Connection Information
| DualCom Pro 1 - MCM plug-on module - Line A DualCom Pro 2 - DI |
PSTN Line T (RJ12 Pin 4) |
| DualCom Pro 1 - MCM plug-on module - Line B DualCom Pro 2 - AL |
PSTN Line R (RJ12 Pin 3) |
Panel Programming
- Menu 19 – Installer menu
- Menu 9 – Communications menu
- PBX: (not set)
- Ph1 No: (any 9 digit number) [012345678]
- Ph2 No: (not set)
- Ser No: (not set)
- CBack: (not set)
- Comp: (not set)
- System Account: (account number) {DualCom Pro account will do]
- Area 1 Account (account number) [area 1 account number]
- DTMF Format No: (4 - ContactID large)
- Network Address: (0)
- Computer Address: (0001)
- O/C Areas: (not set)
- STU ID: (0000)
- Encryption Key: (0)
- Number Of Rings: (1)
- Number Of Calls Before Answer: (0)
- Tone Dialling: (Yes)
- Answer Machine Defeat: (No)