Panel Connection – Dial Capture

Panel Connection Information

Panel Programming

• Enter User code
• Go to Menu 7 and enable service mode
• Enter Engineer mode
• Go to menu 17 and enable service In
• Go to menu 19 Select advanced service menu
• Go to Menu 9 Communication options
• Ensure PBX is BLANK
• Ensure MSN is BLANK
• Select dial tone detection (UK)
• Select DTMF tone dialling (YES)
• Select enable PSTN line fault monitor (NO)
• Select Monitor Service tones (NO)
• Select 3-digit SIA extensions (YES)
• Select ISDN point to point (NO)
• Select 200 baud reverse area open/close (NO)
• Select X25 TEI value <2>
• Select Audio listen in time <180>
• Select Audio listen in time frame <30>
• Select Report mains fault (YES)
• Select Report line fault (YES)
• Select Enable GSM line fault monitor (NO)
• Select the central station to program (Central station1)
• Select the reporting format (Option 7)
• Enter the first phone number <01234 567890>
• Enter the first phone number 2
• Enter the system account number <_____>
• Select BELL modem tones for SIA (YES)
• Enter the Area account number <_____>
• Select Dual reporting (NO)
• Select listen in (NO)
• Select Disable reporting inhibits (NO)
• Select reserved (NO)
• Select X_SIA Max Characters <30>
• Select X25 account code (Not Set)
• Select X25 line type <0>
• Select connection type 0 (PSTN)
• Suppress FTC for voice reporting (NO)
• Retry Count (10)

UDL/Remote Management Programming

• Go to menu 29
• Select enable remote up/download (YES)
• Select up/download if any area armed (YES)
• Select Enable remote control (YES)
• Select Remote control if any area armed (YES)
• Select use modem init string (NO)
• Select Report alarms to computer (NO)
• Select Report access events to computer (NO)
• Enter security password <0000000000> (Ten zeros)
• Select Security attempts <255>
• Select Number of rings before answering <1>
• Select Number of calls before answering <0>
• Select Answer machine defeat (NO)
• Select Reserved (NO)